WSD settings
Activates/deactivates the WSD (one of the network protocols supported in Windows Vista)
setting.
Note
When you set WSD settings to Active, the printer icon is displayed on the Network Explorer
in Windows Vista.
LLTD setting
Activates/deactivates the Link Layer Topology Discovery (LLTD) setting.
Bonjour settings
Enable/disable Bonjour
Selecting Enable allows you to use Bonjour to perform the network settings.
Service name
Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
You cannot use the same service name as that already used for other LAN connected
devices.
LPR service advertising
Selects whether to advertise the Line PRinter daemon protocol (LPR) service using Bonjour.
Note
Select Enable for LPR protocol setting to activate this setting.
LPR protocol setting
Activates/deactivates the LPR setting.
Reset LAN settings
Initializes the network settings on the machine.
Important
Note that initialization erases all connection settings with computers, and printing or scanning
operation may become impossible. To use the machine over network, refer to your setup
manual. Be careful when you initialize the network settings on the machine.
Note
When you initialize the network settings using the Canon IJ Network Tool, refer to Initializing the
Network Settings of the Machine
.
Page top
Page 795 of 988 pagesLAN settings
