Main Burner Conversion (Cont.)
9
Reinstall Grill Bottom Pan
- Holding the front of the Grill Bottom Pan, rotate it up and push it backwards to reposition the Grill Bottom Pan.
- Using a #2 Phillips screwdriver, reinstall the six #8x3/8” screws that attach the Grill Bottom Pan to the underside of grill. DO NOT over-
tighten the screws.
Grill
Bottom Pan
In Stored
Position
Reinstall 6 #8x3/8”
screws into Grill
Bottom Pan.
Grill
Bottom
Pan
NOTE: Cabinet doors are shown
removed to enhance clarity
DO NOT remove cabinet doors
Before reinstalling Tank Heat Shield proceed to “Natural Gas Hose Conversion” below.
Natural Gas Hose Conversion
10
- Manifold connection is located on the right hand side and toward the front and inside of the cart.
- Using a wrench, not provided, remove LP Regulator Hose Assembly from Manifold Connection. Save removed LP Manifold Connection for
converting back to LP Tank Gas.
6
Manifold
Connection
LP Regulator
Hose Assembly
Cabinet doors shown removed
for clarity. DO NOT remove
cabinet doors.
17
