Page 8 of 21 COLORband™ PiX User Manual Rev. 6
Before mounting the product
, read and follow the safety recommendations indicated in
the Safety Notes.
Orientation
The COLORband™ PiX
may be mounted in any position; however, make sure adequate
ventilation is provided around the product.
Rigging
· Before deciding on a location for the product, always make sure there is easy
access to the product for maintenance and programming.
· Make sure that the structure or surface onto which you are mounting the product
can support the product’s weight. See the Technical Specifications
section of this
manual for weight information.
· When mounting the product overhead, always use a safety cable.
product securely to a rigging point, whether an elevated platform or a truss.
· When rigging the product onto a truss, use a mounting clamp
capacity.
· When power linking multiple products, you must
always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
· The bracket adjustment
knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs by hand.
Using tools could damage the knobs.
· The mounting brackets also serve as floor supports/allow for
When mounting the product on the floor, make sure that the product and cables are
away from people and vehicles.
· The CBB-6 bracket (sold separately) is fully compatible with the COLORband™ PiX
and COLORband™ PiX Mini.
Mounting Diagram
