A SERVICE OF

logo

2002 Avalanche 3-13
Rocker Panel
Sectioning
Removal Procedure
1. Remove all related panels and
components.
2. Restore as much of the damage as
possible to factory specifications.
3. Note the location and remove the
following as necessary:
• Sealers
• Sound deadeners
• Anti-corrosion materials
IMPORTANT: Take care not to
damage the inner panels or
reinforcements.
4. Cut the Rocker Panel in the
locations where sectioning is to be
performed.
5. Locate and drill out all factory
welds. Note the number and
location of the welds for installation
of the service part.
6. Remove the damaged Rocker Panel
section.
1