8-33
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
OL-4277-01
Chapter 8 Profile and Web Page Parameters and Defaults
Parameter Details
ReorderTone Parameter Example1
Assume that you want a reorder tone in which:
• The frequencies 900 Hz, 1400 Hz, and 1800 Hz play sequentially.
• Each frequency plays once for 0.33 seconds.
• There is no silence after the first and the second frequencies.
• There is 1 second of silence after the third frequency (before the first
frequency starts again)
• The volume of each frequency is –19 dBm.
• The tone plays until another call event stops the tone.
For this reorder tone, make the following setting. See Table 8-7 for a detailed
explanation.
ReorderTone:1,3,24917,3405,14876,4671,5126,5178,3,2640,0,2640,0,
2640,8000,0,0
Table 8-7 Reorder Tone Parameter Example 1 Explanation
Component Setting Explanation
Sequential 1 Frequencies play sequentially
NumOfFreqs 3 Three frequencies in the tone
TFreq_1 24917 First frequency is 900 Hz
TAmplitude_1 3405 First frequency volume is –19 dBm
TFreq_2 14876 Second frequency is 1400 Hz
TAmplitude_2 4671 Second frequency volume is –19 dBm
TFreq_3 5126 Third frequency is 1800 Hz
TAmplitude_3 5178 Third frequency volume is –19 dBm
NumOfOnOffPairs 3 Three on-off pairs in the cadence of the tone
OnTime_1 2640 Sound in first on-off pair plays for 0.33
seconds
OffTime_1 0 No silence after the first sound (the second
sound plays immediately)
OnTime_2 2640 Sound in second on-off pair plays for 0.33
seconds
