Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)
BASE SERVER STANDARD CAPABILITIES and FEATURES
7
Storage controller ■ Embedded RAID (3 Gbs)
• Embedded SATA-only RAID controller, supporting up to 4 SATA-only
drives (RAID 0, 1, 10)
• ROM5 embedded RAID upgrade, supporting up to 8 SAS/SATA drives
(RAID 0, 1, 10). SAS and SATA drives can be mixed.
• ROM55 embedded RAID upgrade, supporting up to 8 SAS/SATA drives
(RAID 0, 1, 10, 5). SAS and SATA drives can be mixed.
■ 2008M-8i Mezzanine Cards (6 Gbs) - two versions
• Cisco UCSC RAID SAS 2008M-8i Mezzanine Card, supporting up to 8
SAS/SATA drives supporting RAID 0, 1, 10, 5, and 50. SAS and SATA
drives can be mixed. This card has a product ID (PID) of
UCSC-RAID-11-C220.
• Cisco UCSC RAID SAS 2008M-8i Mezzanine Card, supporting up to
eight SAS/SATA drives supporting RAID 0, 1, and 10. SAS and SATA
drives can be mixed. This card has a product ID (PID) of
UCSC-RAID-MZ-220.
■ Plug-in PCIe Cards (6 Gbs)
• LSI MegaRAID SAS 9266-8i 8-port plug-in PCIe RAID RAID controller
card (occupies a half-height PCIe slot), supporting RAID levels 0, 1,
10, 5, 6, 50, 60 and up to 8 internal SAS or SATA drives. SAS and SATA
drives can be mixed.
• LSI MegaRAID SAS 9266CV-8i RAID 8-port PCIe plug-in RAID controller
card, supporting RAID 0, 1, 10, 5, 6, 50, and 60 and up to eight
internal SAS or SATA drives. SAS and SATA drives can be mixed.
Interfaces ■ Rear panel
• One RJ45 serial port connector
• Two USB 2.0 port connectors
• One DB15 VGA connector
• Two RJ-45 10/100/1000 Ethernet port connectors
• One RJ-45 10/100/1000 Ethernet management port, using Cisco
Integrated Management Controller (CIMC) firmware
■ Various PCIe card ports (dependent on which cards are installed)
• Converged Network Adapter (CNA) ports
• Network Interface Card (NIC) ports
• Host Bus Adapter (HBA) ports
■ Front panel
• One KVM console connector (supplies two USB, one VGA, and one
serial connector)
Front Panel A front panel controller provides status indications and control buttons
Power subsystem Up to two 450 W 650 W power supplies. One is mandatory; one more can be
added for 1 + 1 redundancy.
Capability/Feature Description
