A SERVICE OF

logo

7
Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R)
78-20770-01
Installing the Antenna
Installing the Antenna
You can install the antenna on any flat vertical surface, on a pole, or on a ceiling. All hardware for
mounting the antenna on a wall or ceiling is provided. If you intend to install your antenna on another
surface, you must provide the appropriate hardware.
Tools and Equipment Required
A mounting installation kit is included with the antenna and consists of the following hardware:
Mount interface bracket
Mount base
Wall bracket
One 1/4–20 x ½-in. cap screw
One 1/4–20 wing screw
Two #10 x ¾-in. screws
Two #10 x ½-in. screws
One screen mesh washer
One spherical washer
3/16 allen wrench
Rubber gasket
Jam nut
You may need the following tools and equipment, which are not provided.
A #2 Phillips screwdriver
A drill and drill bit
A pencil
Two hose clamps