45-19
Cisco CallManager Administration Guide
OL-5378-01
Chapter 45 Cisco IP Phone Configuration
Configuring Cisco IP Phones
Softkey Template Information
Softkey Template Choose the appropriate softkey template. The softkey
template determines the configuration of the softkeys on
the Cisco IP Phones 7960, 7940, and 7905.
Firmware Load Information (Leave blank to use default.)
Phone Load Name Enter the custom software for the Cisco IP Phone.
The value that you enter overrides the default value for
the current model. For more information, see the “Device
Defaults Configuration” section on page 6-1.
Cisco CallManager does not make this field available for
H.323 clients or CTI ports.
For more information about Cisco IP Phone software and
configuration, refer to the Cisco IP Phone
Administration Guide for Cisco CallManager.
Module 1 Load
Name
Enter the custom software for the Cisco IP Phone 7914
Expansion Module, if applicable.
The value that you enter overrides the default value for
the current model.
Module 2 Load
Name
Enter the custom software for the second
Cisco IP Phone 7914 Expansion Module, if applicable.
The value that you enter overrides the default value for
the current model.
Cisco IP Phone—External Data Locations (Leave blank to use default.)
Information Enter the location (URL) of the help text for the
information (i) button. Leave this field blank to accept
the default setting.
Cisco CallManager displays this field only for
Cisco IP Phone 7960 and 7940 models.
Table 45-1 Phone Configuration Settings (continued)
Field Description
