![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/2/17/217500c2-ddd5-49e1-a5e5-3ab8c902a327/217500c2-ddd5-49e1-a5e5-3ab8c902a327-bg3d.png)
Alpha SRM Console Firmware 7–23
Using the AlphaBIOS Firmware Update Utility to Update the Flash ROM
7.4.2 Starting the AlphaBIOS
To start the AlphaBIOS, follow this procedure:
1. Insert the AlphaBIOS diskette into diskette drive A.
2. At the Alpha SRM Console prompt, enter the following command:
>>>fwupdate
Note:
Because the firmware update utility reinitializes some system compo-
nents, it may appear as if your system is restarting.
Figure 7–1 shows an example of the AlphaBIOS Boot screen with the “Press
<F2> to enter SETUP” message at the bottom.
Figure 7–1 AlphaBIOS Boot Screen
3. Press F2 to start the AlphaBIOS setup program.
Press <F2> to enter SETUP
digital
AlphaBIOS Version 5.60
Please select the operating system to start:
Windows NT Workstation 4.00
Press Enter to choose.