Installing the NDIS 2.01 Driver 5-7
The following steps assume you have already configured the
adapter, started the program on the TokenDisk diskette, and
are at the main menu.
To install the NDIS driver, follow these steps:
1 Select Network Drivers on the main menu and press
[Enter].
2 Select NDIS Driver Installation and Information on the
Network Drivers menu, and press [Enter].
3 Select your network operating system.
4 Follow the instructions provided.
Instructions for using the TokenDisk diskette as an automatic
OEM import disk for IBM LAN Server 3.0, Microsoft LAN
Manager, and Microsoft Windows for Workgroups are
included.
Updating the Computer Startup Files
This sample procedure describes how to modify the
PROTOCOL.INI and CONFIG.SYS computer startup files to load
the DOS NDIS driver for a system running LAN Manager.
1 Create a LANMAN subdirectory from the root of your
boot disk using the following command:
MD \LANMAN
2 Build a PROTOCOL.INI file in the LANMAN subdirectory.
The protocol manager, PROTMAN.DOS, places the
PROTOCOL.INI file in the LANMAN subdirectory. The
PROTOCOL.INI file contains information about the protocol
manager, NDIS transport protocol, and your network adapter.
