Dell
19
PowerEdge R210 II Technical Guide
5 Power, Thermal, Acoustic
5.1 Power Supplies
The base system includes a single 250W power supply. This unit provides power to the planar, the
internal hard drive bays, and one slim optical disk drive bay. Power is soft-switched, allowing power
cycling using a switch on the front of the system enclosure or through software control (server
management functions). The power system is compatible with industry standards, such as ACPI and
Server 2000. The power supply is equipped with automatic input voltage detection.
5.2 Power Supply Specifications
Table 3. Power Supply Specifications
Non-redundant Power Supply
L-210 mm x W-106 mm x H-40
mm
15 Amps @ 120 VAC, 10 Amps @
240 VAC
Under typical line conditions
and over the entire system
ambient operating range, the
inrush current may reach 55
Amps for 10 ms or less.
1039 BTU per hour maximum
Efficiency
20% to 100% Load
82% to 85% @ 115 VAC
82% to 85% @ 230 VAC
5.3 Heat Dissipation
The heat dissipation for the R210 II power supply is measured at 1040 BTU/hr (maximum).
