106
E
Electrical system
The main components of the electrical system are:
Headlight:
bulb type: 2 x H11 (12 V-55 W).
side light:
bulb type: 2 x H16W (12 V-6 W).
Electrical controls on handlebars:
turn indicators:
Front: LED.
Rear: bulb type: R10W (12 V-10 W) orange.
Horn.
Stop light switches.
Battery, 12 V-10 Ah.
Alternator 12 V-480 W.
Electronic voltage regulator (rectifier), protected by a 30 A
fuse near the battery.
Starter motor, 12 V-0,7 kW.
Tail light and brake light:
LED.
Number plate light:
bulb type: W5W (12 V-5 W).
Notes
See “Replacing bulbs” on page 83 for relevant
instructions.
Fuses
The main fuse box (1,fig. 84) is located on the left of the
frame. To expose the fuses, take off the protective cover.
The cover indicates mounting positions and ampere ratings.
The fuse (2) protects the electronic regulator. Remove the
protective cap to access the fuses.
A blown fuse is identified by a broken inner filament (3, fig. 86).
Important
To avoid possible short circuits, switch the ignition
key to OFF before replacing the fuse.
Warning
Never use a fuse with a rating other than that specified.
Failure to observe this rule may damage the electric system
or even cause fire.
