Effective April, 1999
IL 33-DB6-1
Page 7
Step 5: Preparing the Trip Unit Assembly
A. Attach the Glass Poly Insulation Board to the
back of the Aux. CT Module, as shown, using
the (2) .190-32 x .625" screws, (2) lock
washers, and (2) flat washers supplied.
B.
For Kits Supplied with a PT Module Only.
Mount the PT Module to the Glass Poly
Insulation Board, as shown, using the (2) .138-
32 x .500" screws, (4) flat washers, (2) lock
washers, and (2) nuts supplied.
C. Install the Trip Unit on the top of the Aux. CT
Module, as shown, using the (2) .190-32 x 4.00"
screws, (2) lock washers, and (2) flat washers
supplied. Note that the brass spacers are
placed between the bottom of the Trip Unit and
the top of the Aux. CT Module. Do not
completely tighten the screws at this time.
D. Mount the Trip Unit Mounting Brackets to the
sides of the Aux. CT Module, as shown, using
the (4) .190-32 x .625" screws, (4) lock
washers, and (4) flat washers supplied, so they
align with the slots and “pinch” the Trip Unit in
place.
