SPECIFICATIONS SM109z
DIMENSIONAL DRAWING
INPUT
A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. SM109z/0004644/001/2 pp September 2002 Printed in USA
Manufacturing tolerances are +/- 0.13 and +/- 1°
The 2-way full-range loudspeaker system shall incorporate a 10-in
LF transducer and a 1.4-in voice coil compression driver.
The LF transducer shall be mounted in a vented enclosure tuned
for optimum low frequency response. The HF transducer shall be
loaded on a axis-symmetrical, 1-in exit Wave Guide Plate™ with a
nominal conical beamwidth of 100°. An internal passive filter net-
work shall provide all acoustical crossover and system equalization
requirements.
System frequency response shall vary no more than ±3 dB from
100 Hz to 19 kHz measured on axis. The loudspeaker shall produce
a sound pressure level (SPL) of 95 dB SPL on axis at 1 meter with
a power input of 1 watt, and shall be capable of producing a peak
output of 126 dB SPL on axis at 1 meter. The loudspeaker shall
handle 300 watts of amplifier power (continuous) and shall have
a nominal impedance of 8 ohms.
The loudspeaker enclosure shall be irregularly trapezoidal in shape
and shall have rubber footpads on one side. Its baffle shall be
angled up 37°. It shall be constructed of exterior grade Baltic
birch plywood and shall employ extensive internal bracing. It shall
be finished in wear-resistant textured black paint. Input connec-
tors shall be 2x Neutrik NL4 Speakon wired in parallel. It shall
include a pole mount cup and handle integral to the enclosure.
The front of the loudspeaker shall be covered with powder coated
perforated steel grille.
The 2-way full-range loudspeaker shall be the EAW model SM109z.
0001243(A) 9/12/02
L
A
C
C
C
L
6.44C
L
3.75
9.25
12.25
RIGHT SIDE
LEFT SIDE
HANDLE
10.53
7.43
1.32
A
2X 9.64
2X INPUT CONNECTOR
GRILLE PARTIALLY SHOWN
2X 4.00 T.S.C
NOTES:
1. SYMBOL INDICATES FEET.
2. SYMBOL INDICATES CENTER OF
BALANCE.
3. WEIGHT APPROX. 27 LBS.
4. SHIPPING WEIGHT APPROX. 32 LBS.
5. HEIGHT OF FEET APPROX. .4"
L
2X 7.56
1.734.31
R 3.44
19.75
2X 20.15
3.94
TOP HAT
VIEW A-A
9.25
