- 21 -
Service and spare parts
Servicing and possible repairs must be carried out by a
service company authorised by the supplier. Use only
spare parts supplied by these.
Before calling service, use the trouble shooting table
”In the event of a fault” to try to attend to the fault yourself.
Note that electrical faults shall always be rectified by a
certified electrician.
State the appliance’s model designation, product- and
serial numbers according to the data plate affixed to the
rear of the dishwasher.
You can record these details here:
TYPE. ............................................................
MOD. ............................................................
PROD.NO. ............................................................
SER.NO. ............................................................
Purchase date............................................................
Under what circumstances does the fault occur?
Service
Installation instructions
Any electrical work required to install this appliance,
should be carried out by a qualified electrician or
competent person.
Any plumbing work required to install this appliance,
should be carried out by a qualified plumber or com-
petent person.
Technical specifications
Capacity: 5 place settings accordance EN 50242
Dimensions: Height 460 mm
Width 450 mm
Depth 480 mm
Weight: Net 17 kg
Water pressures: Minimum 50 kPa (0,5 bar)
Maximum 1000 kPa (10 bar)
Water temperature: Maximum 65° C
Electrical data: Power supply 230 V - 50 Hz
Fuse 10 A
Heating element 1200 W
Power rating 1280 W
