82
R4C706
short.bk Rev. E
TRBLE.FM A5 size
5/24/01
L
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
Paper improperly loaded
If you have loaded the paper too far into the printer, the printer
cannot feed the paper correctly. Turn the printer off and gently
remove the paper. Then turn the printer on and reload the paper
properly.
Paper is not ejected fully or is wrinkled
Try one or more of these solutions:
❏ If the paper does not eject fully, press the
b
maintenance
button, then open the printer cover and remove the paper.
Also, check the Paper Size setting in the Control Panel.
❏ If the paper is wrinkled when it comes out, it may be damp
or too thin. Load a new stack.
Note:
Store any unused paper in its original packaging in a dry area. See
“Paper” on page 97 for specifications
Printer Does Not Print
If the printer does not print, check and see if one of the following
error indications is displayed, then try the solutions listed.
❏ All lights are off
❏ Lights came on and then went out
❏ Only the process light is on
❏ The
b
error light is flashing or on
❏ One of the ink out lights is flashing or on
❏ Ink out lights are on and the other lights are flashing
