4
Installation Instructions
Flush fitting installation options
D
C
B
20 mm
2.5 mm
20 mm
2.5 mm
20 mm
2.5 mm
CUPBOARD FRONT
DRAWER FRONT
Installation instructions
1
Check that the oven cavity is square and
within the limits specified.
2
Remove the mains wiring access cover.
3
Connect the mains wiring and refit the
access cover.
4
Remove the oven door and accessories and
slide the oven into place. Centre the oven
in the cavity, leaving a space of 2.5 mm on
each side between the door edge and the
joinery.
5
Use the four ‘wood screws’ and washers
supplied to secure the oven to the cavity,
through the holes in the oven frame. See the
flush fitting installation options.
6
Test the oven then refit the door and
accessories. Check that the oven is firmly
secured in the oven cavity.
Installing a cooktop above the
oven
If installing a cooktop above the oven ensure
adequate clearance is provided for the
cooktop as per the cooktop manufacturer’s
instructions.
