5
VF-16
Phantom power
Connector XLR
Output level 48 ± 4 V (ON/OFF by SETUP mode)
Impedance 10 kΩ or more
DATA OUT
Connector Square shape optical
Format IEC consumer Optical Standard EN60958 (S/P DIF)
Alesis Proprietary Mutichannel Optical Digital Interface
Control System Input & Output
SCSI DATA
Connector Half pitch 50-pin female
Protocol SCSI-2, unbalanced transfer method
Transfer type Asynchronous
Number of units connected 1
MIDI IN/OUT
Connector DIN 5-pin
Format MIDI standard
PUNCH IN/OUT
Connector PHONE (TTL level)
Output Level (SETTING 1)
INPUT (+2 dBV, 1 kHz)→ STEREO OUT -10 dBV ± 2 dB
INPUT (-50 dBV, 1 kHz)→ STEREO OUT -10 dBV ± 2 dB
INPUT (+2 dBV, 1 kHz)→ AUX SEND 1, 2 -10 dBV ± 2 dB
Frequency Response (SETTING 1)
INPUT (+2 dBV, 20 ~ 20 kHz)→ MONITOR OUT +1, -2 dB
INPUT (-50 dBV, 20 ~ 20 kHz)→ MONITOR OUT +1, -3 dB
INPUT (+2 dBV, 20 ~ 20 kHz)→ AUX SEND 1, 2 +1, -2 dB
EQ Characteristics (SETTING 1)
HI (Frequency: 500 ~ 20 kHz, Q: 0.1 ~ 20) ±18 dB ± 3 dB
MID (Frequency: 500 ~ 20 kHz, Q: 0.1 ~ 20) ±18 dB ± 3 dB
LO (Frequency: 400 Hz) ±18 dB ± 3 dB
S/N (SETTING 1, Σ: SETING 2)
INPUT (+2 dBV)→ MONITOR OUT 88 dB or more (with 20kHz LPF + A-curve filter*)
INPUT (-50 dBV)→ MONITOR OUT 80 dB or more (with 20kHz LPF + A-curve filter*)
INPUT A ~ H Σ (+2 dBV)→ MONITOR OUT 79 dB or more (with 20kHz LPF + A-curve filter*)
INPUT A ~ H Σ (-50 dBV)→ MONITOR OUT 74 dB or more (with 20kHz LPF + A-curve filter*)
PHONES OUTPUT residual noise -85 dBV or less (with 20kHz LPF + A-curve filter*)
T.H.D. (SETTING 1)
INPUT (+2 dBV)→ MONITOR OUT (-10 dBV) 0.05 % or less (with 20kHz LPF + A-curve filter*)
INPUT (-40 dBV)→ MONITOR OUT (0 dBV) 0.05 % or less (with 20kHz LPF + A-curve filter*)
INPUT (+2 dBV)→ PHONES OUT (20 mW/16
ΩΩ
ΩΩ
Ω) 0.05 % or less (with 20kHz LPF + A-curve filter*)
Dynamic Range (SETTING 1)
INPUT (+2 dBV)→ MONITOR OUT (-10 dBV) 88 dB or more (with 20kHz LPF + A-curve filter*)
Crosstalk (SETTING 1) 60 dB or more (Frequency: 1 kHz)
Click Noise (SETTING 1)
Power ON/OFF -20 dBVp-p or less
Other switching -30 dBVp-p or less
GENERAL
Dimensions 380 (W) x 98 (H) x 335 (D) mm
Weight Approx. 4.0 kg
Power Requirement 100V AC, 120V AC, 230V AC
Power Consumption 15 W
* A-curve filter: with IEC 651A characteristic
Specifications are subject to change without notice for product improvement.
