MMB Web-UI (Web User Interface) Operations
FIGURE 1.76 [SNMP v3 Configuration] window
TABLE 1.106 Setting and display items in the [SNMP v3 Configuration] window
Sets the Engine ID.
You can use alphanumeric characters, spaces, and the following characters:
! " # $ % & ' ( ) = - ^ ~ ¥ @ ` [ ] { } : ; * + ? < > . , / _ |
However, the following restrictions apply:
The character string cannot begin with a space or #.
The character string cannot end with a space.
For an explanation of the setting and display items other than [Engine ID], see TABLE 1.104 Setting and
display items in the [SNMP Trap] window window.
TABLE 1.107 Buttons in the [SNMP v3 Configuration] window
Sets the specified information.
Restores the original information and does not set the specified information.
(1) Menu Operation
[Network Configuration] - [SNMP Configuration] - [SNMPv3 Configuration]
(2) Window Operations
- Correcting the information on the selected user
1. Check the check box of the user. Then, enter any necessary information. Finally, click the
[Apply] button.
