3-4
13. After choosing ALL sources, press the NEXT soft key, and the RADAR SETUP menu
appears. If you do not have a radar installed, go to step 33.
ANTENNA TYPE A
HEADING DATA MAGNETIC
ANTENNA ROTATION ROTATE
RADAR OPTIMIZATION OFF
TIMING ADJUST OFF
M. B. SUPRRESSION OFF
RADAR ANTENNA HEIGHT MEDIUM (3-10m, 10-33ft)
STC CURVE MEDIUM
MONITOR MODE OFF
HEADING ADJUST OFF
Installation wizard, radar setup
14. Choose ANTENNA TYPE and then press the EDIT soft key.
ANTENNA TYPE
▲
{
A (MODEL 1824C)
~
B (MODEL 1834C)
{
C (MODEL 1934C)
{
D (MODEL 1944C)
{
E (MODEL 1954C)
{
F (MODEL 1964C)
▼
15. Choose the appropriate antenna type and then press the ENTER soft key.
16. Choose HEADING DATA and then press the EDIT soft key.
HEADING DATA
▲
{
MAGNETIC
~
TRUE
▼
17. Choose the appropriate heading data format and then press the ENTER soft key. Select
MAGNETIC when connecting with a magnetic compass, or select TRUE when
connecting with a gyrocompass or satellite compass.
18. Choose ANTENNA ROTATION and then press the EDIT soft key.
ANTENNA ROTATION
▲
~
ROTATE
{
STOP
▼
19. Choose ROTATE (other than MODEL 1954C or 1964C) or STOP (MODEL 1954C or
1964C) and then press the ENTER soft key.
For the MODEL 1954C or 1964C, follow the procedure in the illustration at the top of
the next page. For other models, go to step 20.
