3-13
42. Press the NEXT key, and the DATA4 (PC/NMEA/EXT. BUZZ) port setup menu appears.
Set up this port similar to how you set up the DATA2 port.
NMEA O
UTPUT FORMAT NMEA VER. 2.0
BAUD RATE 4800 bps
BIT LENGTH 8 bits
STOP BIT 1 bit
(CONTROL: Xon/Xoff)
Installation wizard, DATA4 (PC/NMEA/EXT. BUZZ) port setup menu
Description of items in “port” menus
Item Description Settings Default Setting
Output Format Selects NMEA output version for the
equipment connected.
NMEA0183 Ver. 1.5,
NMEA0183 Ver. 2.0
NMEA0183 Ver.
2.0
Baud Rate Sets baud rate.
DATA2 port:
AUTO*
1
, 4800,
38400*
2
(bps)
DATA4 port: 4800,
9600, 19200 (bps)
4800 bps
Lat/Lon Format Selects latitude/longitude format to
output.
DD°MM.MM’,
DD°MM.MMM’,
DD°MM.MMMM’
DD°MM.MMM’
XTE Format Selects number of XTE digits to output. X. XX, X. XXX X. XX
Output
Destination
Selects whether to output route (data
sentence RTE) and waypoint data (data
sentence WPL) when destination is set.
Yes, No No
PORT MNITR
(soft key)
Use this key to view which sentences are being output. See the example below.
*
1
Auto detection of baud rate of connected equipment. For use only with device having
“AUTO” feature.
*
2
Choose 38400 bps when connecting an AIS Interface or AIS Transponder to the DATA2
port.
$GPGLL,3415.2345,N,13520.5301,E,152500.00
,A*E7<CR><LF>$GPGLL,3415.2345,N,135
20.5301,E,152500.00,A*E7<CR><LF>$GPGLL
,3415.2345,N,13520.5301,E,152500.00,A*
E7<CR><LF>$GPGLL,3415.2345,N,13520.530
1,E,152500.00,A*E7<CR><LF>$GPGLL,3415.
2345,N,13520.5301,E,152500.00,A*E7<CR>
<LF>$GPGLL,3415.2345,N,13520.5301,E,15
2500.00,A*E7<CR><LF
Installation wizard, port monitor display
