iii
TABLE OF
CONTENTS
FOREWORD............................................. iv
SYSTEM CONFIGRATION ........................ v
1. OPERATIONAL OVERVIEW
1.1 Control Description .........................1-1
1.2 Turning On and Off the Power ......1-2
1.3 Adjusting Display Contrast and
Brilliance..........................................1-3
1.4 Selecting the Display Mode ............1-3
1.5 Icons ...............................................1-6
2. TRACK
2.1 Enlarging/Shrinking the Display......2-1
2.2 Selecting Display Orientation..........2-1
2.3 Shifting the Cursor ..........................2-1
2.4 Shifting the Display .........................2-2
2.5 Centering Cursor Position...............2-2
2.6 Centering Own Ship's Position........2-2
2.7 Stopping/Starting Plotting and
Recording of Track.........................2-2
2.8 Erasing Track..................................2-3
2.9 Selecting Track Plotting Interval......2-4
2.10 Apportioning the Memory..............2-5
2.11 Selecting Bearing Reference ........2-6
3. MARKS
3.1 Entering/Erasing Marks...................3-1
3.2 Selecting Mark Shape.....................3-2
3.3 Connecting Marks
(selecting mark connection line) ....3-2
3.4 Entering Event Marks......................3-3
3.5 Selecting Event Mark Shape...........3-3
3.6 Entering the MOB Mark ..................3-4
4. NAVIGATION PLANNING
4.1 Registering Waypoints ....................4-1
4.2 Editing Waypoints ...........................4-5
4.3 Deleting Waypoints.........................4-5
4.4 Registering Routes .........................4-6
4.5 Deleting Route Waypoints...............4-7
4.6 Replacing Route Waypoints............4-7
4.7 Deleting Routes ..............................4-8
5. STARTING FOR DESTINATION
5.1 Setting Destination..........................5-1
5.2 Canceling Destination.....................5-5
5.3 Erasing Route Waypoints (flags).....5-6
5.4 Finding Range and Bearing Between
Two Points.....................................5-7
6. SETTING UP VARIOUS DISPLAYS
6.1 Selecting Data to Display on the
Data Display..................................6-1
6.2 Selecting Position Format ............. 6-2
6.3 Demo Display ................................. 6-4
7. ALARMS
7.1 Arrival Alarm, Anchor Watch Alarm .7-1
7.2 Cross Track Error (XTE) Alarm....... 7-2
7.3 Ship’s Speed Alarm ........................ 7-3
7.4 Trip Alarm .......................................7-3
7.5 Water Temperature Alarm...............7-4
7.6 Depth Alarm....................................7-4
7.7 DGPS Alarm ...................................7-4
8. MENU SETTINGS
8.1 GPS Menu...................................... 8-1
8.2 Selecting Units of Measurement..... 8-4
8.3 Mark, Character Size and Brilliance8-5
8.4 Settings for Connection of
Navigator....................................... 8-6
8.5 Receiving Data from Personal
Computer...................................8-8
8.6 WAAS/DGPS Settings..................8-10
8.7 Displaying GPS Monitor Displays. 8-12
9. MAINTENANCE & TROUBLESHOOTING
9.1 Clearing the Memory ......................9-1
9.2 Preventive Maintenance................. 9-2
9.3 Error Messages .............................. 9-2
9.4 Troubleshooting..............................9-4
9.5 Diagnostic Tests .............................9-5
APPENDIX
MENU TREE ........................................A-1
DIGITAL INTERFACE
(IEC 61162-1 EDITION 2 (2000-07)) ....A-4
TIME DIFFERENCES.........................A-21
GEODETIC CHART LIST...................A-22
LORAN C CHAINS.............................A-23
DECCA CHAINS.................................A-24
PARTS LIST .......................................A-25
SPECIFICATIONS ............................... SP-1
INDEX ................................................... IN-1
