Rino 600 Series Owner’s Manual 15
Waypoints and Tracks
Waypoints are locations you record and
store in the device.
You can save your current location as
a waypoint.
Select .
1. Select > .
2. Select a waypoint.
Before you can edit a waypoint, you
must create a waypoint.
1. Select .
2. Select a waypoint.
3. Select an item to edit.
4. Enter the new information.
5. Select
.
1. Select .
2. Select a waypoint.
3. Select .
Waypoint averaging allows you to
increase the accuracy of a waypoint
location by collecting multiple samples
of the waypoint location.
1. Select .
2. Select a waypoint.
3. Move to the location.
4. Select .
5. When the sample condence status
bar reaches 100%, select .
For best results, collect four to
eight samples for the waypoint,
waiting at least 90 minutes between
samples.
