18 GPSMAP 3006C/3010C Owner’s Manual
BASIC OPERATION > REVIEWING AND EDITING WAYPOINTS
Moving a Waypoint
You can modify a waypoint by moving or “projecting” the distance and bearing
from its present location to a new location.
To
move the waypoint on the map:
1. Press the Move Wpt soft key. The map window on the right side of the
page is highlighted with the selected waypoint centered and highlighted on
a map display. The word MOVE appears below the pointer.
2. Use the ROCKER to move the waypoint to the new location. The distance
and bearing from the waypoint’s current location appears in the upper-left
corner of the map window.
3. Press ENTER to accept the new waypoint location.
4. Press FCTN to return to the left side of the Review Waypoint Page.
Using Waypoint Lists
The Points tab on the Main Menu has two sub tabs, User and Proximity, which
allow you to manage a large number of waypoints quickly and efficiently. The
Proximity sub tab also provides a continuously updated proximity waypoint alarm
that you can use to define an alarm circle around submerged hazards or shallow
waters.
To access the Points tab from the Main Menu:
1. Press and hold ADJ/MENU to open the Main Menu.
2. Use the ROCKER to highlight the Points tab, and highlight either the User
or Proximity sub tab.
Sub tabs
