3
Step 1: Mount the nüvi
1. Remove the clear plastic from the suction
cup. Clean and dry your windshield and
the suction cup with a lint-free cloth.
2. Place the suction cup on the windshield.
3. Plug the vehicle power cable into the
power connector on the right side of the
cradle.
Cradle
Power cable
4. Snap the cradle onto the suction cup
arm.
Suction cup mount
5. Flip the lever back, toward the
windshield.
6. Fit the bottom of your nüvi into the
cradle.
7. Tilt the nüvi back until it snaps into place.
8. Plug the other end of the vehicle power
cable into a power outlet in your vehicle.
Your unit should turn on automatically if it
is plugged in and your vehicle is running.
9. Ifyouareusingatrafcreceiverin
Europe, secure the antenna on the
trafcreceivertothewindshieldusing
thesuctioncups.(Thetrafcreceiveris
included in some nüvi packages.)
Step 2: Congure the nüvi
To turn on your nüvi, slide the Power
key to the left. Follow the on-screen
instructions.
Step 3: Acquire Satellites
1. Go outdoors to an open area, out of
garages, and away from tall buildings.
2. Stop your vehicle, and turn on the nüvi.
