StreetPilot 2730 Owner’s Manual 45
APPENDIX
Using the 2730 Unit Keys
➊
➋
➌
➍
➎
➏
➊
FIND—opens the Find menu.
➋
MENU—opens the Menu page. Press repeatedly to
scroll through the Menu page, Tools menu, and Settings
menu.
➌
MAP—opens the Map page. Press repeatedly to
scroll through the Map page, Trip Computer, and Music
Player.
➍
SPEAK—announces voice directions.
➎
Power switch—turns the unit on and off.
➏
Infrared (IR) window—receives remote control
signals.
Installing the 2730 in Your Vehicle
You can use the permanent or temporary adhesive disks
or the non-skid friction mount to mount the StreetPilot in
your vehicle.
To attach the mounting disk to your dashboard:
1. Clean and dry the area where you want to place
the mount.
2. Remove one side of the backing from the
adhesive and place the adhesive on the bottom
of the mounting base.
3. Place the mounting base so the locking lever
is facing you and then position the base on the
cleaned area. Apply pressure to adhere the base
to the dashboard.
NOTE: The permanent adhesive disk is extremely
difficult to remove. Only install if you are sure you
want to leave the mount in that location.
