Creating and Navigating to Waypoints
To create a waypoint from the map:
1. From QueMap, press the Rocker key in any
direction to activate Pan Mode. An arrow
appears on the map.
2. Continue to press the
Rocker key until the
arrow points to the place you want to save as
a waypoint.
3. Press
ENTER. An Information screen appears.
Highlight Create Waypoint and press ENTER.
4. Use the
Rocker and ENTER keys to name the
waypoint.
5. Highlight
OK and press ENTER.
TIP: To create a waypoint inside airspace, use the stylus to tap the
Waypoint icon on the map page.
To go to a waypoint or recent point:
1. Press the Direct To D
key.
2. Press the
Rocker key Down to highlight the
Aviation pick-list. Press ENTER.
3. Highlight
Recent or Waypoints and press
ENTER.
4. Highlight the point you want to go to. Then
press the Rocker key Right to highlight Go To
and press ENTER.
Viewing Details/Changing Modes
To view details for an airport:
1. Press the NEAREST key or Direct To D
key on the aviation cradle.
2. Highlight the airport you want to view
details for and press ENTER.
3. To view Comm, Runway, Approach, or VOR
details, highlight that information type in
the list and press ENTER.
To change between Aviation and
Automotive modes manually:
1. From QueMap, press the MENU key and
select Switch Usage Mode.
OR:
1. From QueMap, press the
MENU key and
select Preferences.
2. From the
pick-list in the top left corner,
select Usage Mode.
3. Select
Automotive from the Navigation
Mode pick-list.
TIP: If Auto Select is checked in Preferences, the iQue 3600a
automatically switches to Automotive mode when you insert the unit
into an automotive cradle or Aviation mode in the Aviation cradle—no
need to switch back and forth manually.
Selecting an Approach
To select an approach for your
destination airport:
1. While you have an active flight plan (or Direct
To), press the
Que button until you see the
Active Route page.
2. Press the MENU key.
3. Highlight
Select Approach and press ENTER.
4. Highlight the Approaches pick-list and press
ENTER. A list of approaches appears.
5. Highlight an approach from the list and press
ENTER. Then highlight Select
and press ENTER.
6. Highlight
No and press ENTER if you want
to proceed directly to the final approach fix.
Select Yes if you want to activate vectors.
NOTE:
If you select Yes to activate vectors, you will not see any active
navigation until you are on your final approach.
To cancel an active approach:
1. Press the Que key until you see the Active
Route page.
2. Highlight
Remove Appr and press ENTER.
Using Flight Plans
Once you create a flight plan, it is saved automatically in the Saved Routes
list. The iQue 3600a names the flight plan using its starting and ending points
(example: “KIXD-KSLN”). You can activate this flight plan at any time from the
QueRoutes page.
To activate a saved flight plan:
1. Press ESCAPE until you see the Applications
Launcher page. Continue to press ESCAPE until
you see Que in the pick-list at the top right
corner of the page.
2. Highlight
Routes and press ENTER.
3. Highlight
Saved Routes and press ENTER.
4. Highlight the route you want to activate and
press ENTER.
5. Highlight
Activate and press ENTER.
To stop navigating a flight plan:
1. With an active flight plan, press the Que button
until you see the Active Route page.
2. Press the
MENU key.
3. Highlight
Deactivate and press ENTER.
Choose Select Approach from the menu.
Select an approach from the list.
Highlight the type of
information you want to view
in the list and press ENTER.
