Spindle Alignment
Horizontal Position Alignment
To use a test indicator to align the rotary
table:
1.
2.
Figure 4
Note: Refer to Accessories on Page 15 for
test indicator options from Grizzly.
Figure 4.
3.
Note: For best results, turn the mill spindle in
only one direction.
4.
5.
Step 4
6. Step 5
Tip: Use a mirror to read the indicator when
it is facing away from you.
To use an edge finder to align the rotary
table:
1.
2. ON
3.
Note: When recording the mill table position,
take into account the backlash that is usually
present in the leadscrew.
4.
5.
Steps 34
