Top cover
Description Spare part number
Top cover (includes TouchPad)
●
For use with black and blue models only
537622-001
●
For use with pink HP models only
537625-001
●
For use with white HP models only
537624-001
●
For use with HP Mini 110 by Studio Tord Boontje models only 579615-001
Before removing the top cover, follow these steps:
1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the device.
3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
4. Remove the battery (see
Battery on page 44).
5. If your device has WWAN capability, remove the SIM (see
SIM on page 45).
6. Remove the memory module (see
Memory module on page 46).
7. Remove the keyboard (see
Keyboard on page 48).
8. Remove the hard drive or solid-state drive assembly (see
Mass storage devices on page 54).
Remove the top cover.
1. Turn the device upside down, with the front toward you.
2. Use a thin, flat tool to release the 4 tethered rubber feet.
3. Remove the four Phillips PM2.5×7.0 screws (1), and the Phillips SP2.0×5.0 screw (2) that secure
the top cover to the base enclosure.
Component replacement procedures 57
