A SERVICE OF

logo

hp photosmart 1315 color printer
47
USB connection problems
Problem Possible cause Solution
My printer is
connected with a USB
cable through another
USB device or a hub
and when I try to print
I get a message
saying “There was an
error writing to
<name of USB port>.”
Your printer may not be
getting good data from the
other device or hub.
OR
Two-way communication
between the printer and
the computer was
interrupted by another
device attached to the hub.
Connect the printer directly to the USB
port on the computer.
Try disconnecting other USB devices
from the hub and print your document
again.
The USB cable is too long. See “specifications” on page 64 for the
supported USB cable length and make sure
you are using a supported length.
I have connected my
printer using a USB
cable, and when I try
to print I get a
message saying
“There was an error
writing to Dot4.”
(Windows PC only)
There is a problem with the
USB connection.
Unplug the USB cable from the
computer, then plug it in again.
Restart your computer.