A SERVICE OF

logo

Open as PDF
next previous
Setting Up
Arrange paper edges.
Rock
the paper tray to gather the
edges of the stack together
to ensure correct
positioning of paper in the
tray.
Install the paper tray.
Align the sides of the tray
with the guide grooves of
the tray slot (the left groove
is engraved with a arrow)
and firmly slide the tray all
the way into the slot.
Notice:
You cannot install the paper tray with the pressure plate raised.
10. Remove the adhesive tape
which secures the rear
stacker.
Open the rear
stacker and make sure the
paper guide is pushed down
in the locked position.
Close the rear stacker.
Notice:
If the paper guide is not in the locked position, the printer will not
work.
1-12
User’s Manual