Control panel message Description Recommended action
Rotating <COLOR>
motor
alternates with
To exit press
STOP key
A component test is in progress; the
component selected is <color>
Cartridge motor.
Press S
TOP
when ready to stop this test.
Rotating motor
alternates with
To exit press
STOP key
The printer is executing a Component
Test and the component selected is
Rotating <COLOR>.
Press S
TOP
when ready to stop this test.
Setting saved A menu selection has been saved. No action necessary.
Tray X
<TYPE> <SIZE>
alternates with
To change size or
type press
The printer is reporting the current
configuration of Tray X.
No action necessary.
See
Configuring trays for more details.
UNAUTHORIZED SUPPLY
IN USE
alternates with
Ready
The printer has detected that a non-HP
supply is currently installed and
(override) was pressed.
If you believe you purchased an
HP supply, please call the HP fraud
hotline at 1-877-219-3183.
Service or repairs required as a result of
using non-HP supplies are not covered
under HP warranty.
UNSUPPORTED DATA ON
<FS> DIMM IN SLOT X
alternates with
To clear press
The data on the DIMM is not supported
(although the DIMM itself may be
supported).
Press to clear this message.
or
Press S
ELECT
to continue printing.
USE TRAY X
<TYPE> <SIZE>
The printer is offering a selection of
alternate paper to use for the print job.
1. If desired, use and to highlight
a different size or type, and then
press
to select the size or type.
2. Press
to return to the previous
size or type.
See
Configuring trays for more
information.
Wait for printer
to reinitialize
Settings have been changed before the
printer automatically restarts, or external
device modes have changed.
No action necessary.
Control panel messages (continued)
ENWW Control panel messages 151
