EN
Chapter 2: Printing Tasks 41
Loading Envelopes in the Envelope Feeder
Note
Print only on envelopes approved for
use in the printer (page 37 and
page A-9).
1 Fold down the tray extension. Lift the
envelope weight.
2 Squeeze the release lever on the left
envelope guide and slide the guides
apart.
3 Load envelopes into the envelope
feeder with the side-to-be-printed
facing up, and the postage end
toward the printer. Push the
envelopes into the envelope feeder
as far as they will go without forcing
them. Push the bottom envelope in
slightly farther than the top
envelopes. (Stack them as shown.)
4 Lower the envelope weight onto the
envelopes.
5 Adjust the guides to touch the
envelopes without bending them.
Make sure the envelope feeder is
not overfilled.
Note
Select the envelope size from the
software application (if the setting is
available), the printer driver, and the
Paper Handling Menu in the printer’s
control panel (page B-3). To print by
type and size of paper, see page 52.
