A SERVICE OF

logo

5.
If you need to remove the hinge covers from the display hinges, pull the hinges straight up and off
the display to remove them.
Display hinge covers are available using spare part number 646281-001 for 4530s models.
6. To replace the display bezel, remove the two rubber screw covers (1) and the two Torx
T8M2.5×6.0 screws (2) in the bottom corners of the display bezel.
7.
Flex the top (3) of the bezel, the inside edges of the left and right sides (4), and then the bottom
(5) of the bezel until it disengages from the display enclosure.
The bezel is available using the following spare part numbers:
646265-001: 4530s models without a webcam
646266-001: 4530s models with a webcam
8. Remove the display bezel.
102 Chapter 4 Removal and replacement procedures