A SERVICE OF

logo

P/N 480-0005-00-15 8-15
Chapter 8: Diagnostics/Maintenance
Figure 8-1 WAN Interface Board Handles
6. With the handles in the open position, slide the new card firmly into the slot until the card feels engaged.
7. Push on the inserter/extractor handles in toward each other to the closed position to lock the card in place
(see Figure 8-1).
8. Turn the power switch to on and the blue LED will light momentarily and extinguish.
9. Re-tighten the handle anchoring screws, one in each handle with a #1 Phillips screwdriver.
Open position Closed position
Side View
Side View
Front View
TM
Hot Swap
DS1
StatusAlar m
12
PCICPU
BankDSP
1
2
TX/RXLink
1
2
3
4
5
6
7
8
10/100
Ethernet
Span
Status
TECHNOLOGIES,
INC.
Q
UINTUM
TM