A SERVICE OF

logo

Optical drive
NOTE All optical drive spare part kits include an optical drive bezel and optical drive bracket.
Description Spare part number
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive 438523-001
DVD±RW/R and CD-RW Double-Layer Combo Drive 438524-001
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Remove the battery (see
Battery on page 28).
5. Remove the memory/Mini PCI card module compartment cover (see
Memory module
on page 31).
Remove the optical drive:
1. Position the computer with left side toward you.
2. Remove the Phillips PM2.0×9.0 screw (1) that secures the optical drive to the computer.
3. Use a flat-bladed tool to push the metal tab (2) toward the left side of the computer. (The optical
drive partially removes from the optical drive bay.)
4. Slide the optical drive (3) out of the computer.
5. If it is necessary to replace the optical drive bracket, remove the two Phillips PM2.0×3.0 screws
(1) that secure the bracket to the optical drive.
ENWW Component replacement procedures 35