3. Press to select INFORMATION.
4. Press
to highlight PRINT DEMO.
5. Press
to select PRINT DEMO.
The message PRINTING... DEMO appears on the display until the printer finishes printing the
demo page. The printer returns to the Ready state after printing the demo page.
File directory
The file directory page contains information for all installed mass storage devices. This option
does not appear if no mass storage devices are installed.
1. Press
to enter the MENUS.
2. Press
to highlight INFORMATION.
3. Press
to select INFORMATION.
4. Press
to highlight PRINT FILE DIRECTORY.
5. Press
to select PRINT FILE DIRECTORY.
The message PRINTING... FILE DIRECTORY appears on the display until the printer
finishes printing the file directory page. The printer returns to the Ready state after printing
the file directory page.
PCL or PS font list
Use the font lists to see which fonts are currently installed in the printer. (The font lists also
show which fonts are resident on an optional hard disk accessory or flash DIMM.)
1. Press
to enter the MENUS.
2. Press
to highlight INFORMATION.
3. Press
to select INFORMATION.
4. Press
to highlight PRINT PCL FONT LIST or PRINT PS FONT LIST.
5. Press
to select PRINT PCL FONT LIST or PRINTPSFONTLIST.
The message PRINTING... FONT LIST appears on the display until the printer finishes
printing the font list page. The printer returns to the Ready state after printing the font list page.
Event log
The event log lists the printer events, including printer jams, service errors, and other
printer conditions.
1. Press
to enter the MENUS.
2. Press
to highlight DIAGNOSTICS.
3. Press
to select DIAGNOSTICS.
4. Press
to highlight PRINT EVENT LOG.
5. Press
to select PRINT EVENT LOG.
The message PRINTING... EVENT LOG appears on the display until the printer finishes
printing the event log. The printer returns to the Ready state after printing the event log.
88 Chapter 5 Managing the printer EN_WW
