Interpreting the show Command Displays
The show
memory
Display
The
show memory
command displays information about all of
the memory in your system. This command lists a line of
information about each memory bank. Note that the display
will not indicate an error found in memory. You can only
display memory errors using the
show error
or the
test memory
command. The
test
commands are described in Chapter 14.
The show
memory
Display
Figure 13–7 shows an example of a
show mem
command display.
Figure 13–7 The show memory Display
>>> show memory
DEC 3000 - M600 Memory: 64 Mbytes
------------------------------------------
BANK # MEMORY_SIZE START_ADDRESS
------ ----------- -------------
0 032 Mbytes 0x00000000
1 032 Mbytes 0x02000000
2 000 Mbytes 0x00000000
3 000 Mbytes 0x00000000
>>>
Elements in the
show memory
Display
Figure 13–7 indicates that memory banks 0 and 1 each have 32
megabytes of memory. There is no memory in banks 2 and 3 on
this system.
Identifying a Problem 13–19
