Chapter 2 Printing Tasks 112
Printing Envelopes
Loading Envelopes in Tray 1
1 Open Tray 1.
2 If necessary, pull out the tray extension for
the envelope size you are printing.
3 Place up to ten envelopes between the paper
width guides, face up, with the back flap lying
against the rear paper guide.
4 Slide the paper width guides until they lightly
touch both sides of the envelope stack
without bending it.
Note
Paper heavier than 28 lb (105 g/m²) should be
printed from Tray 1 to the Left Output Bin to
avoid curl.
If Tray 1 is in CASSETTE mode, the printer
Attention light will flash. Press - V
ALUE
+ to
change the size to match the paper size in Tray 1
and press S
ELECT
.
1
4
2
3
