
Information Menu 25
Table 6 Information Menu options
Command Usage
port
Displays port status information, including:
• Port number
• Whether the port uses VLAN tagging or not
• Port VLAN ID (PVID)
• Port name
• VLAN membership
transcvr
Displays the status of the Small Form Pluggable (SFP) module on each Fiber
External Port.
ufd
Displays Uplink Failure Detection information.
sfd
Displays Server Link Failure Detection information.
dump
Dumps all switch information available from the Information Menu (10K or more,
depending on your configuration).
If you want to capture dump data to a file, set your communication software on
your workstation to capture session data prior to issuing the dump commands.
System Information Menu
Command: /info/sys
[System Menu]
snmpv3 - SNMPv3 Information Menu
general - Show general system information
log - Show last 100 syslog messages
user - Show current user status
dump - Dump all system information
The following table describes the System Information Menu options.
Table 7
System Information Menu options
Command Usage
snmpv3
Displays the SNMP v3 Menu.
general
Displays system information, including:
• System date and time
• Switch model name and number
• Switch name and location
• Time of last boot
• MAC address of the switch management processor
• IP address of IP interface #1
• Hardware version and part number
• Software image file and version number
• Configuration name
• Log-in banner, if one is configured
log
Displays 100 most recent syslog messages.