Hewlett-Packard C2M29UA Manual

A SERVICE OF

next previous

Optical drive

NOTE: The optical drive spare part kit includes an optical drive bezel and optical drive bracket.

Description Spare part

number

DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive 660833-001

Before removing the optical drive:

1. Battery (see

Battery on page 30)

2. Service door (see

Service door on page 31)

Remove the optical drive:

1. Remove the Phillips 6.0 x 2.5 screw (1) that secures the optical drive to the computer.

2. Insert a straightened paper clip (2), into the release access opening in the bezel, and then press

inward.

3. Grasp the bezel and slide the optical drive out of the computer (3).

4. To replace the optical drive bracket, position the optical drive with the optical drive bracket

toward you.

5. Remove the two Phillips 3.0 x 2.0 screws (1) that secure the optical drive bracket to the optical

drive.

34 Chapter 4 Removal and replacement procedures