A SERVICE OF

logo

Open as PDF
next previous
10.
Remove the system board (see
System board on page 71).
11. Remove the heat sink (see
Fan and heat sink on page 76).
Remove the processor:
1. Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn
counterclockwise, until you hear a click.
2. Lift the processor (2) straight up, and remove it.
NOTE: The gold triangle on the processor (3) must be aligned with the triangle icon embossed
on the processor socket when you install the processor.
Reverse this procedure to install the processor.
82 Chapter 4 Removal and replacement procedures ENWW