A SERVICE OF

logo

Solution: Remove one of the memory cards. You can use only one memory card
at a time.
Cause: The file system is corrupted.
Solution: Check the display for an error message telling you about the problem and
how to solve it.
If the file system on the card is corrupt, reformat the memory card in your digital
camera.
CAUTION: Reformatting the memory card will delete any photos stored on the
card. If you have previously transferred the photos from your memory card to a
computer, try printing the photos from the computer. Otherwise, you will need to
retake any photos you might have lost.
The Photo light next to the memory card slots is blinking
Cause: The HP All-in-One is reading the memory card.
Solution: Do not pull out the memory card while the Photo light is flashing. A
flashing light means the HP All-in-One is accessing the memory card. Wait until the
light remains solid. Removing a memory card while it is being accessed might corrupt
information on the card or damage the HP All-in-One and card.
The Attention light blinks when I insert my memory card
Cause: The HP All-in-One has detected an error with the memory card.
Solution: Remove and reinsert the memory card. You might have inserted it
incorrectly. Turn the memory card so that the label side is on the left and the contacts
are on the right (and pointing towards the HP All-in-One), and then push the card
forward into the appropriate slot until the Photo light turns on.
If the problem continues, the memory card might be defective.
Cause: You have inserted more than one memory card.
Solution: Remove one of the memory cards. You can use only one memory card
at a time.
The photos on the memory card do not transfer to my computer
Cause: The HP Photosmart Software is not installed.
Chapter 14
140 Troubleshooting
Troubleshooting