Service menu
In the following table, items that have an asterisk (*) indicate the factory default setting.
Menu item Sub-menu item Sub-menu item Description
Fax Service Clear Saved Faxes Clears all faxes in memory.
Run Fax Test Performs a fax test to verify that
the phone cord is plugged in
the correct outlet and that there
is a signal on the phone line. A
fax test report is printed
indicating the results.
Print T.30 Trace Now
Never*
If Error
At End of Call
Prints or schedules a report
that is used to troubleshoot fax
transmission issues.
Error Correction On*
Off
The error correction mode
allows the sending device to re-
transmit data if it detects an
error signal.
Fax Service Log The fax service log prints out
the last 40 entries in the fax log.
Cleaning Page Cleans the product when
specks or other marks appear
on printed output. The cleaning
process removes dust and
excess toner from the paper
path.
When selected, the product
prompts you to load plain Letter
or A4 paper in Tray 1. Touch
the OK button to begin the
cleaning process. Wait until the
process completes. Discard
the page that prints.
USB Speed High*
Full
Sets the USB speed for the
USB connection to the
computer. For the product to
actually operate at high speed,
it must have high speed
enabled and be connected to
an EHCI host controller that is
also operating at high speed.
This menu item also does not
reflect the current operating
speed of the product.
Less Paper Curl On
Off*
When printed pages are
consistently curled, this option
sets the product to a mode that
reduces curl.
ENWW Setup Menu 23
