6.
Swing the top edge of the display panel (2) forward until it rests on the keyboard.
7.
Detach the adhesive strip (3) that secures the display panel cable to the display panel.
8.
Disconnect the display panel cable (4) from the display panel.
9. Remove the display panel.
Reverse this procedure to install the display bezel and panel.
Webcamera module
Description Spare part number
Webcamera module 659516-001
Before removing the webcamera module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 32).
5. Remove the display bezel (see
Display panel on page 34).
6. Remove the display panel (see
Display panel on page 34).
Component replacement procedures
35
