A SERVICE OF

logo

d. Lift the display hinges off the display enclosure (2).
9. If it is necessary to replace the WLAN antenna cables and transceivers:
WLAN and WWAN antennas are available in the Antenna Kit, spare part number 702876-001.
a. Release the WLAN antenna transceivers (1) from the clips built into the display enclosure.
(The WLAN antenna transceivers are attached to the display enclosure with double-
sided tape.)
b. Detach the WLAN antenna cables from the routing channels (2) built into the display
enclosure.
Component replacement procedures
83