This is the green on page 2–30 (seq: 70)
2–30
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 2–30 (seq: 70)
This is the black on page 2–30 (seq: 70)
To cut and unload a plot from a roll in Pause mode
This mode is the default, and is indicated by the
Roll light not flashing.
1
When the plot is finished, the Ready
light stops flashing and goes off.
Holding the media taut on the left,
adjacent to the cutter, slide the cutter
from left to right and then back again,
to cut the plots from the roll.
Ready
Roll
Working with media
Unloading media
Localization Note. .Treat as new.
