7-12 ENWW
Check the media type
Some types of media do not accept ink well, which causes the ink to dry
more slowly and results in smearing. Some thicker cards may also tend to
smear.
For guidelines about selecting media, see Selecting print media.
Check that the media is loaded print-side up.
Check that the correct media type is selected in the printer driver.
Ink is not filling the text or graphics completely
Check the print cartridges
The print cartridge might not be sitting properly in the print cartridge
carriage. Try removing and then reinstalling the print cartridges.
Your print cartridge might be out of ink. Replace the empty print cartridge.
For instructions, see Replacing the print cartridges.
Try cleaning the print cartridges. For instructions, see Cleaning the print
cartridges.
Check the media type
Some media types are not suitable for use with your printer. For guidelines
about selecting media, see Selecting print media.
Check that the media is loaded print-side up.
Faded or dull-colored output
Check the print mode
The Fast mode (Draft in Macintosh) lets you print at a faster rate. This
option is good for printing drafts. To achieve better colored printout, select
Normal or Best mode in the printer driver.
Check the printer driver settings
For Windows, try adjusting the Saturation, Brightness and Color Tone
from the Color tab in the printer driver. For Macintosh, adjust these
settings from the Color Panel in the Print dialog box.
Check the media type print setting
When printing on transparencies or other special media, select the
corresponding media type in the Print Settings dialog box.
Check the print cartridges
Check that all the lines on the printout are connected and have printed
properly. If the lines are broken, one of your print cartridges is probably out
of ink or defective. Check the ink levels, then try cleaning the print
cartridges. If this does not work, replace those print cartridges with new
ones. For instructions, see Replacing the print cartridges.