Server Power Cords
North America:
One Lowline and one Highline (IEC-IEC) power cord ships standard.
Japan:
One IEC (Highline) and one Lowline power cord ships standard.
ROW
One Highline (IEC) power cord ships standard
Power Supply
Auto-sensing 180-Watt PFC Power Supply, CE Mark Compliant
System Fans
5 fans ship standard. 5 total supported internally
Ultra Thin Rack
Deployment Overview
For the Ultra Thin Rack Deployment Overview, including best practices for the HP ProLiant
DL320, please see the following URL:
http://www.hp.com/products/servers/ProLiantdl320/
.
Required Cabling
For required cabling information, refer to the HP Web site at:
http://www.hp.com/products/servers/ProLiantdl320/
.
OS Support
Microsoft Windows NT® Server
Microsoft Windows 2000 Server
Sun Solaris Intel Platform Edition
(
NOTE:
Sun Solaris is not currently supported on the ProLiant DL320 ATA Models.)
Linux Red Hat, SuSE, TurboLinux Server, Caldera eServer)
NOTE:
For a more complete and up-to-date listing of supported OSs and versions, please visit our
OS Support Matrix at:
ftp://ftp.compaq.com/pub/products/servers/os-support-matrix-310.pdf
.
NOTE:
For an up-to-date listing of the latest drivers available for the HP ProLiant DL320, please
see:
http://www.compaq.com/support/files/server/us/index.html
.
Rack Airflow
Requirements
Rack 9000 and 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased
cooling efficiency for rack-mounted servers. The HP 9000 Series Rack and the new 10000
Series Rack provides enhanced airflow for maximum cooling, allowing these racks to be
fully loaded with servers using the latest processors.
Rack 7000 series Cabinets
When installing a server with processors running at speeds of 550 MHz or greater in HP
Rack 7000 series racks with glass doors (165753-001 (42U), and 163747-001 (22U)), the
new processor technology requires the installation of HP's new High Airflow Rack Door
Inserts (327281-B21) (42U), 327281-B22 (42U 6 pack), or 157847-B21 (22U)) to promote
enhanced airflow for maximum cooling.
CAUTION:
If a third-party rack is used, observe the following additional requirements to ensure
adequate airflow and to prevent damage to the equipment:
Front and rear doors:
If your 42U server rack includes closing front and rear doors,
you must allow 5,350 sq cm (830 square inches) of hole evenly distributed from top to
bottom to permit adequate airflow (equivalent to the required 64 percent open area for
ventilation).
Side:
The clearance between the installed rack component and the side panels of the
rack must be a minimum of 7 cm (2.75 inches)
CAUTION:
Always use blanking panels to fill all remaining empty front panel U-spaces in the rack.
This arrangement ensures proper airflow. Using a rack without blanking panels results in improper
cooling that can lead to thermal damage.
QuickSpecs
Compaq ProLiant DL320
Standard Features
DA - 10692 Worldwide QuickSpecs — Version 48 — 10.17.2003
Page 5
