Integrated Serial ATA
Controller
Simultaneous drive
transfer channels
4 channels
Transfer rate
synchronous
(maximum
theoretical)
150 MB/s per channel
Data transfer method
HP Smart Array B110i SATA RAID Controller (non-RAID mode)
HP Smart Array B110i SATA RAID Controller (RAID Mode)
Drive support
Serial ATA
Data transfer modes
Legacy Mode
Combined Mode
Protocol
Serial ATA
Feature
NCQ (Native Command Queuing); AHCI (Advanced Host Controller
Interface)
RAID levels supported
0, 1, 1+0
RAID Features
Supports multiple logical volumes
Setup through ROM based Array Configuration Utility
Installation scripting support
NOTE:
This controller does not support Hot Plug functions or LED
functions.
RAID OS Support
Microsoft Windows Server 2003/2008
NOTE:
In order to implement integrated SATA RAID with Smart Start
8.20 on Windows 2003/2008, the use of a floppy drive is necessary.
Linux (Red Hat, SuSE, UnitedLinux)
Embedded NC326i Dual
Port Gigabit Server
Adapter
Network Interface
10Base-T/
100Base-TX/
1000Base-TX
Compatibility
IEEE 802.3 10Base-T
IEEE 802.3ab
1000Base-T
IEEE 802.3u 100Base-
TX
Data Transfer Method
Four lane (x4), 100MHz PCI Express Reference Clock
Controller
BCM5715
Network Transfer Rate
10Base-T (Half-Duplex)
10 Mb/s
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Half-
Duplex)
100 Mb/s
100Base-TX (Full-
Duplex)
200 Mb/s
1000Base-TX (Half and
Full-Duplex)
2000 Mb/s
Connector
RJ-45
Cable Support
10Base-T
Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
10/100/1000Base-TX
Category 5 UTP; up to 328 ft (100 m)
QuickSpecs
HP ProLiant DL320 Generation 6
Technical Specifications
DA - 13344 Worldwide QuickSpecs — Version 19 — 4.22.2010
Page 42
